Kirkham Engineering Co Ltd

Started: 25 May 2022 at 11:00 BST
Ended: 06 July 2022 at 15:00 BST
Equipment Available as Surplus to Requirements of Ongoing Business. Please See the Sale Information Section for Any Additional Fees That May Be Applicable Upon Purchasing an Item. NOTE: Vendor to Approve All Closing Bids Prior to Apex Final Invoicing.
  •  site
    LOT 1
    Miyano BNX-42SY CNC Turning Centre With Iemca Boss 545E Bar Feeder & Fanuc Control
    Dual Ø115mm Collet Chucks. Maximum Machining Length 100mm. Standard Turning Ø42mm. Axis Travel 'X1'=165mm, 'Z1'=246mm, 'Y'=±40mm, 'X2'=70mm, 'Z2'=525mm. Speed Ranges 'S1'=60-6,000rpm, 'S2'=67-7,000rpm. Inner Draw Tube '...
    Sale has ended
  •  site
    LOT 2
    Traub TNC 42/65 DGY CNC Turning Centre With Hydrafeed MSV65 Bar Feeder & Traub System TX 8F Control
    Dual Hainbuch Ø115mm Collet Chucks. Upper Axis Travel 'X'=140mm, 'Z'=450mm, 'Y'=±35mm. Lower Turret Travel 'X'=140mm, 'Z'=520mm. Main Spindle Speed 5,600rpm (18.5kW Motor). Sub Spindle Speed 5,600rpm (11kW Motor). Driven Tool ...
    Sale has ended
  •  site
    LOT 3
    Nakamura Tome Type WT-250 CNC Twin 12 Tool Position Turret Slant Bed Lathe, Serial# M231505
    Max Turning Diameter 250mm, Max Turning Length 435mm, Net Weight 6000Kg, With Fanuc Series 18i-T controls, Swarf Conveyor, Hydrafeed Model ML1 Short Magazine CNC Barfeeder Serial# 3758 YOM 1999,220 volts,and Reven Air/Oil Separator
    Sale has ended
  •  site
    LOT 4
  •  site
    LOT 5
    Citizen Cincom Type L-320 CNC Sliding Head Automatic Lathe
    Max Turning Diameter 20mm,Max Turning Length 200mm,Spindle Speeds To 10,000 RPM, Weight 1700Kg,With LNS Hydrobar Mini- Sprint Bar Feeder. Serial # E3121 (1995).
    Sale has ended
  •  site
    LOT 6
    Citizen Cincom Type L-320 CNC Sliding Head Automatic Lathe,
    Max Turning Diameter 20mm,Max Turning Length 200mm,Spindle Speeds To 10,000 RPM, Weight 1700Kg,With LNS Hydrobar Mini- Sprint Bar Feeder. Serial # E3053 (1994),
    Sale has ended
  •  site
    LOT 7
    Adcock Shipley 1ES Horizontal Milling Machine
    Table Dimension 755 x 205mm (3 'T' Slots).
    Sale has ended
  •  site
    LOT 8
    SMT Type Abene Swivel & Sliding Headstock Vertical & Horizontal Milling Machine
    Table 1200mm x 260mm With 12-Spindle Speeds 44-2000 RPM, (Please Note Vice Not Included)
    Sale has ended
  •  site
    LOT 9
    Hardinge Lathe
    Approx Swing Ø330mm. Centre Height 165mm. Bed Length 860mm. 8 Station Turret.
    Sale has ended
  •  site
    LOT 10
    Ward Cutmaster Cutter Grinder
    Table Dimension 500 x 155mm.
    Sale has ended
  •  site
    LOT 11
    Iemca CH220/32 Bar Feeder
    Overall Length 4.7m. S/No. 97052638 (1997).
    Sale has ended
  •  site
    LOT 12
    Brierley Drill Grinder
    6 Jaw Ø80mm Chuck. Main Wheel Dimensions 7 x 3/4 x 1".
    Sale has ended
  •  site
    LOT 13
    Progress No1 17in Swing Vertical Bench Drill
    5-Spindle -Speeds 340-2580 RPM On Steel Stand
    Sale has ended
  •  site
    LOT 14
    Progress No.1 Pedestal Drill
    Table Dimension 260 x 260mm. Throat 220mm. Speed Range 340-2,850rpm.
    Sale has ended
  •  site
    LOT 15
  •  site
    LOT 16
  •  site
    LOT 17
  •  site
    LOT 18
    Xpelair Type iPx2 Motorised Stainless Steel Extraction Hood
    Hood Size 1006mmx x1005mm x 400mm Deep, 200/240Volts
    Sale has ended
  •  site
    LOT 19
    Adcock Shipley Horizontal Milling Machine Model 1ES
    Table Length 900mm (3 'T' Slots). Speed Range 250-2,500rpm. S/No. 1ESAH7124A0374.
    Sale has ended
  •  site
    LOT 20
    Murad Centre Lathe
    Note: Spares Or Repair.
    Sale has ended
  •  site
    LOT 21
    Freestanding Mezzanine Floor (Dismantled)
    Approximately 96sqm & 12m x 10m footprint with staircase and hand rail. NOTE: Now dismantled and stored. Images were taken in 2018 before being dismantled. Apex cannot guarantee all parts shown in images are available as part of this lo...
    Sale has ended
  •  site
    LOT 22
    Degreasing Tank
    Approx Dimensions W1,000 x D760 x H950mm.
    Sale has ended
  •  site
    LOT 23
    Britain Lathe
    Speed Range 56-1968rpm.
    Sale has ended
  •  site
    LOT 24
  •  site
    LOT 25
    Pedestal Drill with Tapping Head
    Table Dimension 300 x 220mm (3 'T' Slots). Throat 155mm. Speed Range 330-2,000rpm.
    Sale has ended
  •  site
    LOT 26